2024 Honda HHT25SUT4C

Engine
remove
Engine Type
Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
Honda Engine Model
GX25
Displacement
25 cc (1.53 CID)
Bore & Stroke
35 X 26 mm (1.4 X 1 in.)
Maximum Net Torque
1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
Idle Speed
3,100 ± 200 RPM
Max. No-Load RPM* (Requires Blade Barrier)
10,000 RPM
Ignition System
Transistorized flywheel magneto (electronic)
Spark Plug
CMR5H (NGK)
Cooling System
Forced air
Starting System
Recoil starter
Stopping System
Ignition primary circuit ground
Carburetor
Diaphragm type w/fuel pump
Recommended Fuel
Regular unleaded gasoline (87 Octane)
Fuel Primer
Anti-flood type
Fuel Capacity
0.5 L (17.6 fl. Imp. oz.)
Fuel Consumption (approximate)**
0.5 L/hr (0.11 Imp. gal./hr)
Clutch Drive Type
Centrifugal Twin Shoe-Clutch
Clutch Size
54 mm (2.125 in.) Diameter
Clutch Engagement
4;200 ± 200 RPM
Air Cleaner
Semi-dry type
Lubrication System
Oil mist
Oil Capacity
80 cc (2.82 fl. Imp. oz.)
Recommended Oil
SAE 10W30 API service classification SJ or later
Product Dimensions
remove
Overall Length With Cutter Mounted
191.0 cm (75.2 in.)
Overall Width
(handlebars) 60.5 cm (23.8 in.)
Overall Height
41.5 cm (16.3 in.)
Dry Weight (Without Blade)
6.15 kg (13.6 lbs.)
Additional Information
remove
Handle Type
U-shaped (bike type handle)
Throttle Control Type
Two-motion trigger type
Engine Stop Switch
Slide type switch
Cutting Head (Standard)
Semi-matic line feed nylon (tap-and-go)
Cutting Head (Optional)
Manual, pro-tap, semi-pro
Cutting Width
43.2 cm (17 in.)
Line Type
Quiet LineTM
Cutting Line Diameter
2.41 mm (0.095 in.)
Anti-Vibration System
Standard
Drive Shaft Type
Flexible steel cable
Final Drive Gear Case
Helical cut bevel gears / Sealed ball bearings
Gear Ratio
1.235 Input shaft: 1 (Output Shaft)
Main Pipe Diameter
25.4 mm (1 in.)
Main Pipe Thickness / Material
1.5 mm (0.06 in.) / Aluminum
Trimmer Guard With Cutter
Standard
Steel Blade Guard
Standard